
Thermal Scans in Saskatoon: See Where Your Building Loses Heat
MAGNUS uses an infrared camera to show where Saskatoon homes and buildings lose heat. Missing insulation, air leaks and cold framing show up as clear colour differences on the scan. You see the problem before anyone spends money fixing it.
We measure before we quote.
Mon–Fri, 8am–5pm
- Award-Winning Contractor
- Licensed & Insured
- 7,000+ Projects Completed
- Free Consultation
- Financing Available
- Serving Saskatoon & Surroundings Since 2008
What our customers say
At a glance
A thermal scan shows surface temperature across walls, ceilings and floors. Where insulation is missing or air is leaking, the surface reads colder in winter, and the camera picks it up. You get images of the problem spots, so the repair goes where the heat is actually escaping.
Free
Consultation to talk your job through
Photos
Send photos and a specialist will reach out
Financing
Available, ask at your consultation
Since 2008
Insulating and repairing Saskatchewan buildings
Service area: Available in Saskatoon and within 50 km of the city, including Warman, Martensville and Delisle.
Signs you need thermal scan
A scan shows where the heat is going instead of guessing.
Missing or settled insulation shows up clearly on the camera.
Air leaks show as cold streaks around openings, outlets and trim.
Know the condition of the walls and ceilings before you renovate.
Warm spots on the roof deck point to heat escaping from the attic.
A scan confirms the new insulation is continuous with no gaps.
Cold rooms, drafts or high bills and no idea why? A thermal scan shows where the heat is going. Call (306) 880-2878 · Mon–Fri, 8am–5pm
How long it takes
| Typical house | One to two hoursOn-site scan time |
|---|---|
| Larger or complex home | Two to three hoursMore area to cover |
| Commercial building | Scoped per buildingSize and access decide it |
Timeframes are typical for a straightforward job and are confirmed at the consultation.
How we handle thermal scan
Pick the right day
Scans read best when it is much colder outside than inside, which in Saskatoon means most of the heating season.
Scan inside and out
Walls, ceilings, rim joists, windows, doors and the attic hatch are scanned with an infrared camera.
Mark the problem spots
Cold areas, air leaks and gaps in insulation are photographed with the thermal image beside the normal photo.
Walk you through it
We show you what the scan found and which spots are worth fixing first.
Ready to sort out your thermal scan?
Serving Saskatoon. The consultation is free and there is no obligation.
What it costs
Building size and how much of it needs scanning decide the cost. A single problem room is a smaller job than a whole building. Tell us what you are seeing and we will quote it.
| Building size | More area takes longer to scan |
|---|---|
| Scope | One problem area or the whole envelope |
| Access | Attics, crawlspaces and roof areas add time |
| Building type | Residential, commercial or agricultural |
We do not publish fixed prices, because the number depends on what the consultation finds.
What you get with MAGNUS
See the heat loss
Thermal images show exactly where heat is escaping.
Whole building
Walls, ceilings, rim joists and openings all scanned.
Yours to keep
You keep the findings whether or not we do the work.
Checks finished work
Confirms new insulation went in without gaps.
Local and seasonal factors in Saskatoon
Saskatoon's long heating season is what makes a thermal scan useful. With a big difference between inside and outside temperatures, heat loss shows up clearly on the camera.
Older houses rarely lose heat where owners expect. Windows get blamed, while the attic hatch and the rim joist quietly lose more. A scan shows which one it is before you spend anything.
Common Questions
What does a thermal scan show?
Surface temperature differences across walls, ceilings and floors. In winter, areas with missing insulation, air leaks or cold framing read colder than the surrounding surface, so the camera shows where heat is escaping.
When is the best time for a thermal scan?
During the heating season, when it is much colder outside than inside. The bigger the temperature difference, the clearer the heat loss shows on the camera. In Saskatoon that covers most of the year from late fall to spring.
Is a thermal scan the same as an energy audit?
No. A thermal scan shows where a building loses heat. A formal energy evaluation for a rebate program is done by a registered energy advisor and includes testing and a rating. MAGNUS does thermal scans, not formal energy evaluations.
Frequently asked questions
We show you what the scan found and which spots matter most. Some fixes may be things you can do yourself or that another trade handles. We would rather give you an accurate picture than sell you the largest job.
It can point to areas worth checking, because wet materials often read at a different temperature. A scan alone does not confirm moisture, so suspect areas are checked with a moisture meter.
No. Rebate programs that need an official energy evaluation require a registered energy advisor. A thermal scan is still useful before applying, because it shows where the upgrade money should go.
Yes. Shops, warehouses and agricultural buildings can be scanned too. Tell us the building type and what you are seeing, and we will explain what the scan involves.
Related services
Insulation Upgrades & Rebate Programs
Upgrading an existing building, and understanding how rebate and grant programs generally work.
Insulation Upgrades & Rebate Programs detailsAir Sealing
Sealing the leaks that carry heat out of a building, usually the cheapest improvement available.
Air Sealing detailsCold Rooms & High Heating Bills
Diagnosing why one room never warms up, or why the whole house costs too much to heat.
Cold Rooms & High Heating Bills detailsSee the full range on our Saskatoon insulation and building envelope services page, or book a free consultation.
Industry leaders in comfortable, healthy & efficient buildings
Get thermal scan priced properly
We offer full consultations. With 7,000+ projects completed, we have seen it all and can often diagnose from photos. Send us photos and a specialist will reach out. If an on-site consultation is needed, they will let you know. Mon–Fri, 8am–5pm.