Free consultations across Saskatoon and Saskatchewan
Foam sealing the framing cavities of an interior wall

Air Sealing in Saskatoon: The Cheapest Fix for a Cold House

MAGNUS seals the gaps that leak heat out of Saskatoon homes, at the rim joist, attic hatch, top plates and every ceiling penetration. Air leakage moves heat faster than conduction, which is why sealing usually beats adding depth.

Book a free consultation

We measure before we quote.

Mon–Fri, 8am–5pm

  • Award-Winning Contractor
  • Licensed & Insured
  • 7,000+ Projects Completed
  • Free Consultation
  • Financing Available
  • Serving Saskatoon & Surroundings Since 2008

What our customers say

At a glance

Heat leaves a building two ways. It conducts slowly through materials, and it rides out on moving air far faster. Sealing the second path costs a fraction of what insulation costs, and on most older Saskatoon homes it produces the larger share of the improvement.

  • Free

    Consultation to talk your job through

  • Photos

    Send photos and a specialist will reach out

  • Financing

    Available, ask at your consultation

  • Since 2008

    Insulating and repairing Saskatchewan buildings

Service area: Available in Saskatoon and within 50 km of the city, including Warman, Martensville and Delisle.

Signs you need air sealing

Cold air is entering low as warm air escapes high, driving a constant loop.

The floor cavity is open to unheated space at the rim.

Air is filtering through the joint and depositing dust as it passes.

The rough opening was never sealed behind the trim.

Depth is adequate but air is bypassing it through gaps.

The hatch is usually the largest single unsealed opening in a ceiling.

Warm air is escaping through the fixture and condensing above the ceiling.

If your house feels drafty no matter how high the thermostat goes, air sealing is usually the answer. Send us photos and a specialist will reach out. Call (306) 880-2878 · Mon–Fri, 8am–5pm

How long it takes

Attic plane sealingHalf to one dayDepends on penetration count
Rim joist perimeterHalf a dayTypical basement
Whole-house packageOne to two daysCombined attic, rim and hatch work

Timeframes are typical for a straightforward job and are confirmed at the consultation.

How we handle air sealing

1

Find the leaks

We inspect the rim joist, attic plane, hatch, penetrations and known problem details rather than guessing at the wall.

2

Prioritise by size

The biggest openings get sealed first, because a handful of large gaps usually outweigh dozens of small ones.

3

Seal with the right material

Foam, caulk, gasket or rigid board, chosen by gap size and location, so the seal survives movement and temperature.

4

Verify and document

Sealed points are checked and the work is walked through with you, so you know what was done and where.

Ready to sort out your air sealing?

Serving Saskatoon. The consultation is free and there is no obligation.

What it costs

Air sealing is priced by the number and size of the leaks rather than by square footage. It is normally the least expensive item on any energy quote, and it is the one we recommend doing first when budget is limited.

Number of penetrationsPot lights and plumbing stacks add up quickly
AccessLow attics and finished ceilings take longer
Rim joist lengthSet by the perimeter of the foundation
Materials requiredFoam, gasket and rigid board vary by detail

We do not publish fixed prices, because the number depends on what the consultation finds.

What you get with MAGNUS

Highest return per dollar

Usually the cheapest measurable improvement on an older home.

Biggest gaps first

We prioritise by leak size instead of sealing everything equally.

Stops ice dams at source

Removing escaping heat is what stops snow melting on the roof.

Free consultation

Talk it through with us at no cost before anything is quoted.

Local and seasonal factors in Saskatoon

Cold weather drives air leakage harder. Warm air rises and escapes through the ceiling, which pulls cold air in low to replace it. The colder it gets outside, the stronger that loop becomes.

That is why a house can feel draftier in January than it ever does in October, even though nothing about the building has changed.

Common Questions

Is air sealing more important than insulation?

On most older Saskatoon homes, yes, and it costs far less. Insulation slows heat conduction, but escaping air carries heat out much faster. Sealing first then insulating gives a better result than insulating over unsealed gaps. Both matter in the end. The point is the order you do them in, not choosing one over the other.

Where do houses leak air the most?

The attic hatch, ceiling light fixtures, plumbing stacks, top plates and the rim joist where the floor meets the foundation. Windows and doors get blamed most often but usually account for a smaller share than the ceiling and basement do.

Can a house be sealed too tightly?

A very tight house needs mechanical ventilation to manage moisture and air quality. Almost no older Saskatoon home is anywhere near that point. We will flag it if a building is approaching the threshold where ventilation should be added.

Frequently asked questions

It varies with how leaky the building is to start with. An older home with an unsealed attic plane sees a bigger change than a recent build. We would rather assess your building than quote a percentage that may not apply to it.

Some of it, yes. Caulking around trim and weatherstripping a door are reasonable homeowner jobs. The attic plane and rim joist are where most of the loss actually is, and those are harder to reach and easier to get wrong.

Not on a typical older home, because it starts so leaky. On a tighter building, controlling moisture means ventilation rather than deliberately leaving gaps. We check for existing moisture issues before sealing anything. If a building does reach the point of needing mechanical ventilation, we will say so rather than leaving it deliberately leaky.

A blower door measures total leakage and helps locate it. Whether it is worth doing depends on the building and the scope. We will tell you honestly if a visual inspection of the known problem areas will find the same leaks for less.

Before, always. Once new material is blown in, the ceiling penetrations underneath are buried and much harder to reach. Doing it in the wrong order means paying twice or leaving the leaks in place permanently. If insulation has already gone in, sealing is still possible, but the material has to be moved aside (or extracted) and replaced afterward.

Industry leaders in comfortable, healthy & efficient buildings

Get air sealing priced properly

We offer full consultations. With 7,000+ projects completed, we have seen it all and can often diagnose from photos. Send us photos and a specialist will reach out. If an on-site consultation is needed, they will let you know. Mon–Fri, 8am–5pm.