
Foam Jacket Exterior Insulation in Saskatoon: Wrapping the Whole Building
MAGNUS installs Wrapsulate® Foam Jacket on Saskatoon homes and buildings. It is a Canadian-made spray foam that wraps the outside of the wall in one continuous layer and lets moisture vapour escape. Because it sits outside the framing, it also covers the studs, which otherwise carry heat straight through the wall.
We measure before we quote.
Mon–Fri, 8am–5pm
- Award-Winning Contractor
- Licensed & Insured
- 7,000+ Projects Completed
- Free Consultation
- Financing Available
- Serving Saskatoon & Surroundings Since 2008
What our customers say
At a glance
Insulation between studs leaves the studs themselves uninsulated, and wood conducts heat far better than the insulation beside it. A continuous exterior layer covers that framing, which raises real wall performance well beyond what the cavity rating alone suggests. The effect is largest on walls with closely spaced framing.
Free
Consultation to talk your job through
Photos
Send photos and a specialist will reach out
Financing
Available, ask at your consultation
Since 2008
Insulating and repairing Saskatchewan buildings
Service area: Available in Saskatoon and within 50 km of the city, including Warman, Martensville and Delisle.
Renovating a building with an existing interior vapour barrier
Many existing homes and commercial buildings already have an interior vapour barrier. Before adding exterior insulation, it's important to understand how that wall manages moisture.
The risk: vapour lock
A vapour-tight exterior layer can trap moisture between two low-permeability layers, so the wall can no longer dry.
What trapped moisture does
It can lead to condensation, mould growth, wood rot and long-term building-envelope problems.
The solution: Wrapsulate® Foam Jacket
A Canadian-made, continuous spray foam that is vapour-permeable, unlike most exterior insulation products.
How it helps
Moisture vapour can move outward, so the wall keeps drying while it gains continuous insulation and air sealing.
Signs you need foam jacket
You are feeling the studs, which conduct heat straight through the assembly.
The one economical moment to add a continuous exterior layer.
Framing positions are visible from outside, marking where heat escapes.
Cavity insulation alone is being bypassed at every framing member.
Finished interiors mean the practical upgrade path is from outside.
Exterior work is already scheduled, so the added cost is incremental.
A vapour-tight exterior layer could trap moisture between two barriers. A vapour-permeable jacket lets the wall keep drying.
Re-siding a Saskatoon home soon? That is the moment to consider wrapping it in continuous foam. Call (306) 880-2878 · Mon–Fri, 8am–5pm
How long it takes
| Single elevation | Two to three daysExcluding siding installation |
|---|---|
| Whole house wrap | One to two weeksDepends on size and detailing |
Timeframes are typical for a straightforward job and are confirmed at the consultation.
How we handle foam jacket
Assess the wall
We check the existing assembly, the state of the sheathing, and how windows and doors are currently detailed.
Plan the details
Window bucks, trim depth and flashing all change when a wall gets thicker, so these are worked out first.
Spray the jacket
Continuous spray foam is applied outside the sheathing in one seamless layer, which acts as an air barrier as well.
Re-detail and re-clad
Flashing, trim and siding are reinstalled over the new layer with the drainage path correctly maintained.
Ready to sort out your foam jacket?
Serving Saskatoon. The consultation is free and there is no obligation.
What it costs
This is a larger investment than cavity insulation because it involves the exterior of the building. It makes the most sense when siding is being replaced anyway, since much of the labour is already being paid for in that project.
| Wall area | Total exterior surface being wrapped |
|---|---|
| Thickness specified | More depth means more material and deeper detailing |
| Window and door count | Each opening needs re-bucking and re-flashing |
| Existing sheathing | Any damage found has to be repaired first |
| Siding reinstatement | New cladding is a significant part of the total |
We do not publish fixed prices, because the number depends on what the consultation finds.
What you get with MAGNUS
Covers the framing
Continuous outside the studs, so the wood no longer bridges heat.
Air barrier too
One seamless sprayed layer stops air movement as well as heat.
Lets the wall dry
Vapour-permeable, so moisture can escape instead of being trapped.
Financing available
Ask at the consultation if you would like to spread the cost.
Free consultation
We look at the existing wall assembly before recommending anything.
Local and seasonal factors in Saskatoon
In a Saskatoon winter the temperature difference across a wall can exceed sixty degrees. At that gap, thermal bridging through the framing becomes a measurable share of total heat loss rather than a rounding error.
Wrapping the outside also moves the framing to the warm side of the insulation, which reduces the chance of condensation forming inside the wall.
Common Questions
What is continuous exterior insulation?
A layer of insulation installed outside the sheathing so it covers the entire wall including the framing. Cavity insulation stops at each stud, and those studs conduct heat through the wall. A continuous layer removes that path. It is the same principle as wearing a coat rather than stuffing insulation between your ribs, which is where the name comes from.
Is exterior foam worth it on an existing house?
It is most worthwhile when siding is being replaced anyway, because the exterior is already being opened up and the incremental cost is much lower. As a standalone project on sound siding it is a harder case to make.
Does exterior insulation cause moisture problems?
Done correctly it reduces them. It keeps the sheathing and framing warmer, so they are less likely to reach the dew point. The product matters too. On a wall that already has an interior vapour barrier, a vapour-tight outside layer can trap moisture between the two. A vapour-permeable jacket such as Wrapsulate lets the wall dry outward.
Frequently asked questions
The walls become thicker, so windows sit deeper and trim details change. Most people find the deeper reveals attractive, but it is a visible change and we walk through it before starting so there are no surprises. Neighbourhood character matters too, and it is worth checking whether any local design rules apply before committing.
Technically yes, and it is sometimes done on a wall being re-clad. Be aware the transition at the corners needs careful detailing, and the benefit is limited to that elevation rather than the whole building. It is most defensible when that elevation is the coldest or the most exposed one on the building.
Not necessarily, but they do need re-bucking and re-flashing to suit the new wall depth. If the windows are near the end of their life, doing both together saves paying for that detailing twice. Doing them together also means one set of flashing details rather than disturbing the same openings twice.
It depends on the target performance and how the details can accommodate it. More thickness gives more benefit but pushes trim, flashing and window depth further out. We work out the practical figure at the assessment. Practical limits usually come from the roof overhang and the existing window depth rather than from the material itself.
It is spray foam, applied differently and formulated differently. Cavity spray foam fills between the studs from inside. Foam Jacket is sprayed as a continuous, vapour-permeable layer on the outside of the sheathing, so it addresses a different heat path. Both may be used on the same project, one filling the cavity and the other wrapping the outside of it.
Related services
Spray Foam Insulation
Closed-cell spray polyurethane foam (SPF) that insulates and seals in one pass, applied by certified applicators.
Spray Foam Insulation detailsAir Sealing
Sealing the leaks that carry heat out of a building, usually the cheapest improvement available.
Air Sealing detailsEfficient Foundations
Insulating foundations, slabs and rim joists so heat stops leaving through the bottom of the building.
Efficient Foundations detailsSee the full range on our Saskatoon insulation and building envelope services page, or book a free consultation.
Industry leaders in comfortable, healthy & efficient buildings
Get foam jacket priced properly
We offer full consultations. With 7,000+ projects completed, we have seen it all and can often diagnose from photos. Send us photos and a specialist will reach out. If an on-site consultation is needed, they will let you know. Mon–Fri, 8am–5pm.