
Mold Remediation in Saskatoon: Fixing the Moisture, Then the Mould
MAGNUS handles mould remediation, which means cleaning up mould growth, in Saskatoon buildings. Mould is a symptom of water, so we find and correct the moisture source first. Cleaning without doing that just delays its return.
We measure before we quote.
Mon–Fri, 8am–5pm
- Award-Winning Contractor
- Licensed & Insured
- 7,000+ Projects Completed
- Free Consultation
- Financing Available
- Serving Saskatoon & Surroundings Since 2008
What our customers say
At a glance
Mould needs three things: moisture, something to feed on, and time. Building materials supply two of them permanently, so the only one that can be controlled is water. Remove the water source and the growth stops. Clean without removing it and the growth returns.
Free
Consultation to talk your job through
Photos
Send photos and a specialist will reach out
Financing
Available, ask at your consultation
Since 2008
Insulating and repairing Saskatchewan buildings
Service area: Available anywhere in Saskatchewan, from our base in Saskatoon.
Signs you need mold remediation
Growth is active somewhere, often hidden inside a wall or under flooring.
Visible growth means the material behind it has been damp for a while.
Condensation is collecting where warm indoor air meets cold glass and frame.
Occupants reacting to something in the building's air.
Moisture is trapped behind the finish and feeding growth underneath.
Below-grade moisture creating the conditions growth needs to establish.
The water source was never found, only the visible surface was treated.
Seeing or smelling mould in a Saskatoon building? Do not disturb it. Have it assessed first. Call (306) 880-2878 · Mon–Fri, 8am–5pm
How long it takes
| Assessment | One to two hoursIncludes tracing the moisture |
|---|---|
| Contained cleanup | Two to five daysDepends on area affected |
| Drying period | Several daysBefore rebuilding can start |
Timeframes are typical for a straightforward job and are confirmed at the consultation.
How we handle mold remediation
Find the water
We trace the moisture source, whether that is a leak, condensation, poor ventilation or ground water entering below grade.
Fix the source
The water problem is corrected first, because cleaning a surface without doing so only resets the clock.
Contain and clean
The area is sealed with negative air, affected material is removed, and surfaces are cleaned under controlled conditions.
Dry and rebuild
The area is dried fully, then insulation and drywall are replaced and finished by the same crew.
Ready to sort out your mold remediation?
Serving Saskatoon. The consultation is free and there is no obligation.
What it costs
Cost follows the affected area, the containment needed, and what caused the moisture. The cleanup is often the smaller part. Correcting a foundation leak or a ventilation problem is what determines the total on many jobs.
| Moisture source | A leak, condensation or ground water each differ |
|---|---|
| Area affected | Surface growth against material that must be removed |
| Containment required | Occupied buildings need fuller isolation |
| Materials to replace | Insulation and drywall that cannot be salvaged |
| Rebuild scope | Finishing back to painted surface where required |
We do not publish fixed prices, because the number depends on what the consultation finds.
What you get with MAGNUS
Water found first
The moisture source is traced before any cleaning begins.
Contained work
Negative air and sealed containment so spores do not spread.
Rebuilt after
Insulation and drywall replaced and finished by the same crew.
Licensed and insured
Business licence on file and full liability coverage.
Free consultation
Talk it through with us at no cost before anything is quoted.
Local and seasonal factors in Saskatoon
Saskatoon winters create mould in a way people do not expect. Indoor air holds far more moisture than the outdoor air, and where it reaches a cold surface it condenses.
Window frames, exterior wall corners and uninsulated rim joists are the usual locations. In those cases insulation and air sealing are part of the permanent fix, not just the cleanup.
Common Questions
What causes mold in a Saskatchewan basement?
Usually one of three things. Water entering through the foundation, condensation where warm indoor air reaches cold concrete, or high humidity with insufficient ventilation. Identifying which one it is determines the fix, because the cleanup is the same but the correction is not.
Can I clean mold myself with bleach?
Bleach discolours surface growth but does not address what is inside porous material such as drywall, and it does nothing about the moisture causing it. For a small non-porous surface it may be adequate. For anything on drywall or insulation it is not.
How do I know if mold is behind my wall?
A persistent musty smell with no visible source is the most common indicator, along with staining or bubbling paint. Confirming it means opening the wall, which should be done under containment so spores are not released into the rest of the building.
Frequently asked questions
Often not, since containment isolates the work area from the rest of the building. It depends on where the growth is and how large the affected area turns out to be. We give you a direct answer at the assessment.
It depends on the cause. Damage from a sudden event is often covered, while gradual moisture problems frequently are not. We supply detailed written estimates and photographs suitable for a claim, but your insurer decides coverage. Documenting the moisture source matters for the claim, because insurers usually ask what caused it before deciding.
Air and surface testing can be arranged where it is warranted, and it is sometimes needed for a claim or for a commercial building. For visible growth with an obvious moisture source, testing often adds cost without changing the plan.
Because the water is still there. Cleaning removes what has grown, but if moisture continues reaching the material the growth simply re-establishes. Finding and fixing the water source is the part that makes the cleanup permanent. This is why we will not quote a cleanup on its own if the water problem has not been identified.
Species vary and so do people's reactions to them. Rather than focusing on identifying the species, the practical approach is the same either way: remove the growth, remove the affected material, and stop the moisture that fed it.
Related services
Asbestos Abatement
Asbestos testing, sample collection and contained removal, so renovations start safely.
Asbestos Abatement detailsSpecial Coatings & Waterproofing
Protective coatings and waterproof membranes for foundations, parkades, decks and concrete.
Special Coatings & Waterproofing detailsDrywall Services & Repair
Boarding, taping, texture and repair, finished ready for paint by the crew that started the job.
Drywall Services & Repair detailsSee the full range on our Saskatoon insulation and building envelope services page, or book a free consultation.
Industry leaders in comfortable, healthy & efficient buildings
Get mold remediation priced properly
We offer full consultations. With 7,000+ projects completed, we have seen it all and can often diagnose from photos. Send us photos and a specialist will reach out. If an on-site consultation is needed, they will let you know. Mon–Fri, 8am–5pm.