Free consultations across Saskatoon and Saskatchewan

Radon Control & Prevention in Saskatoon

Continuous spray foam insulation, foundation sealing and soil-gas protection. MAGNUS builds radon-resistant foundations: closed-cell spray foam under the slab, joined to the foundation walls where the building allows.

Book a free consultation

We measure before we quote.

Mon–Fri, 8am–5pm

  • Award-Winning Contractor
  • Licensed & Insured
  • 7,000+ Projects Completed
  • Free Consultation
  • Financing Available
  • Serving Saskatoon & Surroundings Since 2008

What our customers say

At a glance

Radon is a natural radioactive gas that can enter homes and buildings through foundations, cracks, joints and other openings. Long-term exposure to high levels raises the risk of lung cancer. MAGNUS installs spray foam systems that help reduce the paths radon can use to get in. The same layer also insulates, seals out air and controls moisture.

  • Free

    Consultation to talk your job through

  • Photos

    Send photos and a specialist will reach out

  • Financing

    Available, ask at your consultation

  • Since 2008

    Insulating and repairing Saskatchewan buildings

Service area: Available in Saskatoon and within 50 km of the city, including Warman, Martensville and Delisle.

Protect your home from the ground up

We build one continuous, monolithic layer of insulation and air barrier under the concrete slab. Where it suits the building, that layer carries on up the foundation walls.

  • What we do

    Insulation and foundation barrier systems that help limit soil gas getting into the building.

  • What we don't do

    Mechanical radon mitigation. We do not install extraction fans or sub-slab depressurization systems.

1. Continuous under-slab spray foam insulation

We spray high-performance closed-cell spray polyurethane foam under the concrete slab as one continuous layer. When it is properly designed and installed with suitable materials, it can help:

  • Reduce soil-gas entry pathways

    A continuous layer beneath the slab, without the joints of board insulation.

  • Insulate beneath the foundation

    Improved thermal performance under the slab, where heat is otherwise lost to the ground.

  • Control moisture-vapour transmission

    Closed-cell foam limits ground moisture moving up into the slab.

  • Reduce air leakage

    Less air movement through the foundation assembly.

  • Improve comfort and efficiency

    Warmer floors and lower heating demand below grade.

2. Seamless foundation floor & wall protection

One of our key strengths is joining under-slab spray foam to the foundation wall insulation. Where the project allows, the floor and walls become one continuous layer of insulation and air barrier.

That cuts down the gaps, breaks and cold spots where a foundation usually loses heat and lets air in.

One continuous insulation system. Multiple benefits for your foundation.

3. Advanced building-envelope protection

Protecting a foundation takes more than insulation. We look at how all the parts work together, and fit the approach to how the building is built and what it needs to do:

  • Insulation continuity

    No breaks between floor and wall layers.

  • Air-barrier connections

    Sealed transitions at the slab edge and penetrations.

  • Moisture and vapour management

    Controlling ground moisture at the foundation.

  • Foundation wall construction

    Detailing matched to how the foundation walls are built.

  • Thermal bridging

    Covering the slab edge where heat usually escapes.

  • Soil-gas entry pathways

    Reducing the openings soil gas can follow into the building.

Radon-resistant construction is not radon mitigation

Health Canada says soil-gas barriers alone are not an effective stand-alone fix for radon. Active sub-slab depressurization is a proven way to lower high indoor levels.

  • What our system won't do

    It does not remove radon, ensure safe indoor levels, or replace radon protection the building code requires.

  • What it depends on

    Any barrier performance depends on the product's specifications and the full assembly design.

  • Already tested high?

    If an existing home tests high for radon, talk to a certified radon mitigation professional.

Why choose MAGNUS? Your building envelope experts

MAGNUS does more than standard insulation. Our spray foam and building envelope experience lets us build foundation systems that solve several problems at once.

One continuous layer that insulates, seals out air and keeps out moisture gives homeowners and builders warmer, more efficient and longer-lasting buildings.

MAGNUS. Ultimate Prairie Protection. Feel the Difference.

Signs you need radon mitigation

Radon is invisible and has no smell, so testing is the only reliable way to know your indoor level. If a test shows high radon, talk to a certified radon mitigation professional about the right fix.

Radon cannot be seen, smelled or tasted. A long-term test is the only way to know.

Health Canada's guideline is 200 Bq/m³. Above it, consult a certified radon mitigation professional.

More time spent below grade means more exposure at the same level.

Openings through which soil gas can enter the building from below.

A direct path from the soil into the basement air.

Radon testing is increasingly part of a transaction in this province.

The best time to install a continuous under-slab spray foam system.

Building new or replacing a basement slab? That is the moment to plan a continuous under-slab spray foam system. Talk it through with us. Call (306) 880-2878 · Mon–Fri, 8am–5pm

How long it takes

The spray foam application typically takes 1–2 days, depending on the size, accessibility and complexity of the foundation.

Spray foam application1–2 daysUnder-slab, plus foundation walls where appropriate
Other project activitiesVariesSurface preparation, construction coordination, curing

Prep work, site coordination or curing can add time. We look at each project on its own and set a realistic schedule.

How we handle radon control & prevention

1

Review the foundation

We look at the foundation type, the build or renovation schedule and any radon test results before specifying the system.

2

Prepare the sub-base

The surface beneath the future slab is prepared so the foam can be applied as one continuous layer.

3

Apply under-slab foam

Closed-cell spray polyurethane foam is applied beneath the slab in controlled lifts to the specified thickness.

4

Tie into the walls

Where conditions permit, the under-slab layer is connected to the foundation wall insulation as one assembly.

5

Check continuity

Coverage, thickness and transitions are checked before the concrete is placed.

Ready to sort out your radon control & prevention?

Serving Saskatoon. The consultation is free and there is no obligation.

What it costs

Cost depends on the size of the foundation, how thick the foam is, and whether it joins the foundation walls. It is far cheaper to plan it into a new build or slab replacement than to add it later.

Foundation areaSquare footage of slab to be insulated
Thickness specifiedSet by the thermal and vapour targets
Wall integrationExtending the system up the foundation walls
Construction stageNew build, slab replacement or renovation
Preparation neededSub-base condition and access

We do not publish fixed prices, because the number depends on what the consultation finds.

What you get with MAGNUS

One continuous layer

Monolithic closed-cell foam beneath the slab, with no board joints.

Floor tied to walls

Under-slab foam connected to wall insulation where conditions permit.

Insulation, air and vapour

Thermal, air-barrier and moisture benefits in one assembly.

Honest about scope

Radon-resistant construction, not mechanical radon extraction.

Free consultation

Talk through your foundation plans before anything is quoted.

Local and seasonal factors in Saskatoon

Saskatchewan has some of the highest home radon levels in Canada. Levels change from house to house, even on the same street, so testing your own building is the only reliable answer.

For new homes and slab replacements, the foundation is the one chance to build in a continuous barrier beneath the concrete. Once the slab is poured, that layer can no longer be added.

Common Questions

What is a safe radon level in Canada?

Health Canada's guideline is 200 becquerels per cubic metre, averaged over a year. It recommends action above that. Lower is better, since no level is risk-free. If your home tests above the guideline, talk to a certified radon mitigation professional.

How does radon get into a house?

It seeps up out of the ground and enters through openings in the foundation. Cracks in the slab and walls, sump pits, floor drains and gaps around pipe penetrations are the common paths. Warm air rising inside the house draws it upward.

What is radon-resistant construction?

It means building the foundation so soil gas has fewer ways in. One example is a sealed, continuous layer under the slab that joins the foundation walls. It cuts down the paths radon can take, but it is not radon mitigation. Mitigation uses active systems to lower high levels in an existing building.

Frequently asked questions

A properly designed and installed spray foam barrier may help reduce air leaks and the paths soil gas can use to get in. However, spray foam insulation alone is not a proven substitute for a complete radon mitigation system.

Yes. Where construction conditions permit, MAGNUS can create a continuous spray foam insulation system connecting the foundation floor and walls.

No. MAGNUS specializes in continuous spray foam insulation and foundation air-barrier systems rather than mechanical soil-gas extraction.

Radon testing is required. Health Canada recommends long-term testing for at least three months and sets its guideline at 200 Bq/m³. Homes with elevated radon concentrations should be assessed by a certified mitigation professional.

The spray foam application typically takes one to two days, depending on project conditions.

Industry leaders in comfortable, healthy & efficient buildings

Get radon control & prevention priced properly

We offer full consultations. With 7,000+ projects completed, we have seen it all and can often diagnose from photos. Send us photos and a specialist will reach out. If an on-site consultation is needed, they will let you know. Mon–Fri, 8am–5pm.